home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fifty: Elektronik
/
FIFTY Elektronik (PS_Computer_Vertrieb).iso
/
ps8
/
fty1032
/
readme.1st
< prev
next >
Wrap
Text File
|
1994-02-15
|
3KB
|
44 lines
************************************************************************
* *
* Paper Route Ledger - Version 1.3 *
* Copyright (c) 1994 by BlueCollar Software *
* *
* Published exclusively by: *
* RMH Computer Services *
* PO Box 657 *
* Beech Grove IN 46107-0657 *
* (317) 782-9903 *
* *
************************************************************************
Paper Route Ledger (PRL) is provided with an installation utility, which
will not only install the program for you, but will also test your system
for the necessary free hard drive space and minimum DOS version. It will
also check your CONFIG.SYS file for necessary parameters, and will even
update those settings for you if necessary (you can also choose not to let
it do this if you wish). It will also add the PRL subdirectory to your
system PATH statement if you want.
If PRL was down loaded from a computer bulletin board or other electronic
service, it will most likely be compressed and placed in a .ZIP, .ARC, or
similar file. Place the compressed file in a temporary subdirectory on your
hard disk drive, other than the root directory. Decompress the downloaded
file using the appropriate procedures for your system. Then, simply change
to the temporary subdirectory, type INSTALL, and press [ENTER].
(On some machines the [ENTER] key may also be labeled [RETURN])
If you are installing PRL from a distribution diskette, simply place the
installation diskette in an available floppy disk drive, which will usually
be either "A" or "B". Then, from any DOS prompt, type A:INSTALL (or
B:INSTALL, as appropriate), and press [ENTER].
You will be presented with a menu showing 3 different installation
sources (1 floppy disk, 2 floppy disks, or install from hard drive). Select
the appropriate installation source by using the up/down arrow keys to
highlight the proper selection, and press [ENTER].
This program must be installed in a hard disk drive, and there must be at
least 2Mb of free disk space available.